| 释义 |
Definition of coping saw in English: coping sawnoun A saw with a very narrow blade stretched across a D-shaped frame, used for cutting curves in wood. （D形构架、锯条很窄、锯曲线用的）手工锯 Example sentencesExamples - These cuts can be easily made with a miter saw, and excess wood can be cut away with a coping saw.
- It was simple, one of the other dads explained on the night: ‘All you need is a coping saw.’
- A coping saw is needed to follow an irregular, delicate, or intricate cut in wood.
- And, a jig saw or coping saw is just about the only tool you'll need, so don't fret if you are not particularly handy with a hammer and saw.
- Generally, use a handsaw or a circular saw to cut straight lines, a coping saw or a portable jigsaw to cut irregular lines.
- With my coping saw I cut two semi-circular pieces of wood, one to go in the top to give it some rigidity (and help with the light-tight seal), and the other to go on the bottom so I could attach a tripod mount.
- With coping saws, the heavier blade usually has a pin in each end of the blade which slips into a slot of a rotatable round bar.
- Remove the boards and using a coping saw, cut along the pencil line.
- A coping saw has a c-shaped frame and a handle, which is turned to tighten a thin flexible blade.
- Use a single-edge razor blade, matte knife, or coping saw with a very fine blade for detail cutting.
Origin1920s: coping from cope2, used to describe likeness to a vault, arch, canopy, etc.. Definition of coping saw in US English: coping sawnounˈkōpiNG ˌsôˈkoʊpɪŋ ˌsɔ A saw with a very narrow blade stretched across a U-shaped frame, used for cutting curves in wood. （D形构架、锯条很窄、锯曲线用的）手工锯 Example sentencesExamples - A coping saw is needed to follow an irregular, delicate, or intricate cut in wood.
- Generally, use a handsaw or a circular saw to cut straight lines, a coping saw or a portable jigsaw to cut irregular lines.
- A coping saw has a c-shaped frame and a handle, which is turned to tighten a thin flexible blade.
- With coping saws, the heavier blade usually has a pin in each end of the blade which slips into a slot of a rotatable round bar.
- With my coping saw I cut two semi-circular pieces of wood, one to go in the top to give it some rigidity (and help with the light-tight seal), and the other to go on the bottom so I could attach a tripod mount.
- And, a jig saw or coping saw is just about the only tool you'll need, so don't fret if you are not particularly handy with a hammer and saw.
- It was simple, one of the other dads explained on the night: ‘All you need is a coping saw.’
- Use a single-edge razor blade, matte knife, or coping saw with a very fine blade for detail cutting.
- These cuts can be easily made with a miter saw, and excess wood can be cut away with a coping saw.
- Remove the boards and using a coping saw, cut along the pencil line.
Origin1920s: coping from cope, used to describe likeness to a vault, arch, canopy, etc.. |